Gasoline Remote Controlled Lawn Mower

Hot Tags: gasoline remote controlled lawn mower, China gasoline remote controlled lawn mower manufacturers, suppliers, Automatic Sod Cutter, Gasoline Remote Controlled Lawn Mower, Diesel Remote Control Lawn Mower, field management machinery

1.Easy and effortless remote control operation.
2.The harsh terrain is as smooth as walking on flat ground.
3.Manganese steel blade cutting speed.
4.More efficient remote control.

Preparation before operation

1. Check machine status: Make sure the battery of the lawn mower is fully charged. If the battery is low, charge it in time. Check whether the lawn mower tracks are intact. If they are damaged or loose, they should be repaired or replaced in time. The blade should be intact and sharp, and should be replaced promptly if worn or damaged.

2. Clean up the mowing area:

Clean the mowing area to ensure there are no debris, stones or other obstacles that may damage the machine or affect the mowing effect.

3. Read the instructions: You should read the instruction manual carefully before use to understand the usage and precautions of the remote control lawn mower.

Operation process

1.Safe distance: During operation, keep a safe distance to avoid accidental injuries caused by loss of control of the lawn mower.

2. Observe the environment: When using the remote control, pay attention to the surrounding environment to avoid safety accidents caused by careless operation.

3.Adjust the speed: Adjust the crawler walking speed and blade speed according to the actual situation. High-speed walking is suitable for mowing large areas and flat areas, while low-speed walking is suitable for small areas, slopes or areas with many obstacles.

4. Pay attention to the mowing effect: During the mowing process, pay attention to the mowing effect. If you find that there are uncut areas, you should adjust the track walking route or the blade position in time to ensure the mowing effect of the entire lawn.

Post-operation maintenance

1. Turn off the power: After completing the mowing operation, turn off the power switch of the lawn mower and check whether there are any abnormalities with the machine. If there is any abnormality, repair or replace parts in time.

2. Clean the machine: After use, the debris and residual grass inside the lawn mower should be cleaned promptly to maintain the normal operation of the machine and extend its service life.

3. Regular inspection: Regularly inspect and maintain the lawn mower, including battery condition, track and blade wear, etc., to ensure its normal operation and service life.

Preparation before operation：

1.Change the engine oil (our factory added test oil, you can replace it to CE level and above include CE oil). The engine oil must be changed after 20 hours of first time use, and the oil filter element must be cleaned at the same time!
2.The air filter must be filled with oil, and the air filter cotton must be cleaned regularly. The oil inside and the oil inside must be replaced. When reminding customers, only add oil to the air filter (to half of the bottom hole), and the filter cotton inside does not need to be soaked in oil as before.
3.The machine cannot run at low speed when working, and must be in the WORK position (when adjusting the throttle cable, put the throttle handle to the bottom, and the machine throttle needs to be at the bottom and upward a little bit)
4.If the blade is damaged, it must be replaced in time! Rope-like debris on the knife shaft must be cleaned in time!
5.The machine must be charged when it is not used for a long time

Operation process：

1. Turn on the power switch on the machine
2. Put the clutch in the off position and the throttle in the start position
3. Press the pressure reducing valve with one hand
4. At the same time, turn the start key with the other hand for 2-3 seconds
5. Release the pressure reducing valve, release the key, and start the diesel engine
6. After the machine is working, immediately put the clutch in the on position and the throttle in the work position
7. When stopping, put the throttle in the stop position and the clutch in the off position

Post-operation maintenance：

1.Turn off the power: After completing the mowing operation, turn off the power switch of the lawn mower and check whether there are any abnormalities with the machine. If there is any abnormality, repair or replace parts in time.

2.Clean the machine: After use, the debris and residual grass inside the lawn mower should be cleaned promptly to maintain the normal operation of the machine and extend its service life.

3.Regular inspection: Regularly inspect and maintain the lawn mower, including battery condition, track and blade wear, etc., to ensure its normal operation and service life.

Welcome to Zhengzhou Yize Machinery Co.,ltd.
Zhengzhou Yize engaged in a wide range of machine business, We are in this line for more than 11 years. We provide best quality machines and solutions for global users in machinery fields. Some of them also visit us and check our machines. From the single machine to the automatic product line, From china to the whole world. Zhengzhou Yize committed to machine manufacturing and high efficiency producing. We also have development on new material and key technology. We welcome you to visit us and make a deal.